Alu Ceiling

 

PROducts 

Marble Surface
 

CLIP-IN

TILE CEILING SYSTEM

PRODUCT FEATURES
  • Shape: Square and rectangle
  • Material: Grade AA aluminum alloy
  • Thickness: 0.8mm-1.2mm
  • Kinds of punch: More size and pattern to choice
  • Sound absorption: Germany soundtex, MRC0.65-0.8
  • Workmanship: Compression moulding forming
  • Surface: Akzo Nobel powder coating, and the thinkness of coatings is 0.06-0.1mm
  • User type: Special size, kinds of punch, surface colors
and assembly of installation, that could be to orders
  • Installation System: Black groove level type system
and T-shaped carrier system
Common Specifications :
300x300mm、300x600mm、300x1200mm、400x400mm
500x500mm、500x1200mm、600x600mm、600x1200mm
600x1800mm、800x800mm、800x1600mm
Remarks:
1. Customizable unconventional size
2. Customizable galvanized iron square plate
INSTALLATION DIAGRAM
 

LAY-IN

TILE CEILING SYSTEM

PRODUCT FEATURES
  • Shape: Square and rectangle
  • Material: Grade AA aluminum alloy
  • Thickness: 0.8mm-1.2mm
  • Kinds of punch: More size and pattern to choice
  • Sound absorption: Germany soundtex, MRC0.65-0.8
  • Workmanship: Compression moulding forming
  • Surface: Akzo Nobel powder coating, and the thinkness of coatings is 0.06-0.1mm
  • User type: Special size, kinds of punch, surface colors
and assembly of installation, that could be to orders
  • Installation System: Black groove level type system
and T-shaped carrier system
Common Specifications :
600x600mm
600x1200mm
Remarks:
1. Customizable unconventional size
2. Customizable galvanized iron square plate
INSTALLATION DIAGRAM
 

PUNCHING

CEILING

SERIES

PRODUCT FEATURES
Common width
300mm, 600mm
Common length
300mm, 600mm
Square surface of the celling spray pure polyester powder,the board surface color generally use the company's special milky white, for special colors can refer to thecompany's color card. Aluminum plate thickness in the range of 0.4-1.0mm to choose from. The overall plane effect is good, simple and beautiful lines, easy to install
features,widely used in office buildings, shopping malls, railway stations, alrports, large clubs and other occasions. Sound insulation sound up to 0.5-0.82AS, beautifully crafted, suitable for the venue, shopping malls. Fire detection for the A-dlass non-combustible materials.
 

ANGLE CODE

TYPE

INSTALLATION

CEILING

Thickness specifications are often:
1.5mm、 2.0mm、2.5mm、 3.0mm
PRODUCT FEATURES
Shaped Ceiling Ceiling ("7" Hanging Code)
Installation Instructions:
1.According to the requirements of the design drawings, measure the elevation of the ceiling of the special-shaped aluminum veneer after installation, determine the horizontal line of the ceiling, and fix the edge of the horizontal line at the periphery of the wall;
2. Determine the construction direction, lay the lifting holes on the ceilling of the building structure according to the distance of s 1200mm, and fix the boom with expansion bolts;
3. Fix the light steel keel hanging piece and the light steel keel, adjust the light steel keel to the level and adjust the elevation of the light steel keel, andeach keel is parallel to each other;

 
The angle code-mounted ceiling in order to ensure that the the metal veneer in long-term use of flatness and strength, through bolt the ribs and panels connected to form a solid whole, so as to increase its strength and rigidity. Its application
look like a traditional, but is After Technology precipitation results.
4. Fix the light steel keel hanging on the light steel keel and install the M8 boom;
5. Connect two special-shaped aluminum veneers and "7"-shaped hanging pieces together by self-tapping self-drilling screws, and fix them on the M8 secondary booms;
6. The size of the edge should be measured according to the site conditions, and the ceiling should be placed on the corner.
7, the installation process should keep hands clean, can not have sweat, oil and other unclean phenomena.
 

C-SHAPED

STRIP

CEILING

PRODUCT FEATURES
  • Shape: Square and rectangle
  • Material: Grade AA aluminum alloy
  • Thickness: 0.6mm-1.2mm
  • Kinds of punch: More size and pattern to choice
  • Workmanship: Compression moulding forming or
continuous rolling press forming
  • Common specifications: C-shaped (100,150,200,300),
that is equal to or less than 6000mm in length
  • Sound absorption: Germany soundtex, MRCO.65-0.8
  • Surface: Akzo Nobel powder coating, and the thinkness
of coatings is 0.06-0.1mm
  • User type: Special size, kinds of punch, surface colors and assembly of installation, that could be to orders
Common Specifications :
100mm. 150mm、 200mm、
300mm
Remarks:
1. Customizable unconventional size
2. Customizable galvanized iron square plate
INSTALLATION DIAGRAM

G-SHAPED

STRIP

CEILING

PRODUCT FEATURES
  • Shape: Square and rectangle
  • Material: Grade AA aluminum alloy
  • Thickness: 0.6mm-1.2mm
  • Kinds of punch: More size and pattern to choice
  • Workmanship: Compression moulding forming or
continuous rolling press forming
  • Common specifications: G-shaped (100,150,200,300),
that is equal to or less than 6000mm in length
  • Sound absorption: Germany soundtex, MRCO.65-0.8
  • Surface: Akzo Nobel powder coating, and the thinkness
of coatings is 0.06-0.1mm
  • User type: Special size, kinds of punch, surface colors and assembly of installation, that could be to orders
Common Specifications :
Height : 15mm
Width : 100~400mm
Remarks:
1. Customizable unconventional size
2. Customizable galvanized iron square plate
INSTALLATION DIAGRAM
 
 

METAL NET

DRAWING

CEILING

Thickness specifications are often:
1.5mm、 2.0mm、2.5mm、 3.0mm
PRODUCT FEATURES
Metal grid ceiling with an open and transparent vision; is available for a variely of architectural design, visual effects, a unique celling systems. In style, texture and color in a wide range of choice,
you can ensure that each project has a unique appearance. Metal grid through a special manufacturing process in the foil surface
simulaneously cutting and stretching, making a diamond-shaped mesh. Through the mesh shape, mesh orientation and lighting and color changes can be performed more transparent ceiling 
and dynamic. Different mesh types and materials, so that the ceiling design is more personalized, more stylish atmosphere. Range of products for equipment and pedestrian flow areas, such as subways, airports, stations, channel, modemn shopping malls, exhibition centers and other large open public spaces.
INSTALLATION DIAGRAM
  • Aluminum mesh size diagram
  • SWD - short way of diamond
  • LWD-long way of diamond
  • BOND-where two strands intersect
  • STARND THICKNESS-length of
    the metal used to produce one strand
  • LWM(width)-mesh sheet size,the distance of Iwd dirction
  • SWM(length)-mesh sheet size,the distance of swd direction
FLUOROCARBON SPRAYING
COLOR CARD SERIES
POWDER SPRAY PAINT 
COLOR CARD SERIES
COLOR CARD SERIES